USB 2.0 4-Port Isolated Hub - Din rail bracket mounting
USB 2.0 4 Port Isolated Hub with Din Rail Brackets
This isolated hub is a rugged, industrial-grade 4-port full speed USB 2.0 hub and expands one USB port into four optically isolated USB ports. The USB Hub’s power input is designed with a diode bridge circuit, and you don’t need to worry about the input DC power polarity when plugging the power connector.
The hub is designed with optical isolation to enhance isolation protection up to 3000 VDC between upstream and four downstream ports to prevent harmful voltage, ESD shock, ground loops and noise. Each USB device connected to the isolated hub can operate independently with individual power management.
The USB 2.0 4-port hub is designed for the use in industrial applications and is housed in a DIN-rail mountable metal case with screw holes for lockable USB and power cables.
USB 2.0 4-Port Isolated Hub Features
Isolates and protects USB peripheral products from a USB host
Electrical isolation up to 3000 Vrms for each downstream port
Industrial-grade 4 port USB 2.0 hub in a rugged metal case
Suitable for DIN-rail mounting
Common mode filtering on all data lines
Each downstream USB port supplies 5V 500mA power for external high-power USB devices
Individual port power management
Support USB 2.0 full speed 12 Mbps and USB 1.1 low speed 1.5 Mbps data rate with jumper-selection
No software or drivers required
Short circuit and over current protection
LED for power and USB status indication
All USB connectors with screw holes for lockable USB cable
Input power connector with screw holes to lock the power cable
Power 9 ~ 30V DC or AC power input. An external power adapter included
With diode bridge circuit to avoid wrong polarity input DC power
Wide ambient temperature operation 0°C to 60°C (32°F to 140°F)